Antenna Connectors; Antenna Connector Location - Quectel RM502Q-GL Hardware Design

locked within 3 minutes after the loss of lock.
3. Cold start sensitivity: the minimum GNSS signal power at which the module can fix position
successfully within 3 minutes after executing cold start command.

5.3. Antenna Connectors

5.3.1. Antenna Connector Location

RM502Q-GL has four antenna connectors: ANT0, ANT1, ANT2_GNSSL1 and ANT3, which are shown
below.
RM502Q-GL_Hardware_Design
Figure 28: Antenna Connectors on the Module
5G Module Series
RM502Q-GL Hardware Design
64 / 83