LTE HPUE bands
(B38/B40/B41/B42/B43)
5G NR bands
5G NR
5G NR HPUE bands
(n41/n77/n78)
NOTE
1)
For 5G NR TDD bands,
5.2. GNSS Antenna Interface
5.2.1. General Description
The module includes a fully integrated global navigation satellite system solution.
The module supports standard NMEA 0183 protocol, and outputs NMEA sentences at 1 Hz data update
rate via USB interface by default.
The GNSS engine is switched off by default. It has to be switched on via AT command. For more details
about GNSS engine technology and configurations, see document [5].
5.2.2. GNSS Frequency
The following table shows the frequency specification of GNSS antenna connector.
Table 35: GNSS Frequency
Type
GPS/Galileo/QZSS
Galileo
QZSS
GLONASS
BeiDou/COMPASS
RM502Q-GL_Hardware_Design
26 dBm ± 2 dB (Class 2)
23 dBm ± 2 dB (Class 3)
26 dBm +2/-3 dB (Class 2)
the normative reference for this requirement is 3GPP TS 38.101-1 clause 6.3.1.
Frequency
1575.42 ± 1.023 (L1)
1575.42 ± 2.046 (E1)
1575.42 (L1)
1597.5–1605.8
1561.098 ± 2.046
5G Module Series
RM502Q-GL Hardware Design
< -40 dBm
< -40 dBm
(BW: 5–20 MHz)
< -40 dBm
(BW: 5–20 MHz)
Unit
MHz
MHz
MHz
MHz
MHz
1)
1)
62 / 83