Recommended Rf Connector For Antenna Installation - Quectel SC200R Series Hardware Design

Smart Module Series
NOTE
It is recommended to use a passive GNSS antenna when LTE B13 or B14 is supported, as the use of
active antenna may generate harmonics which will affect the GNSS performance.

6.5.2. Recommended RF Connector for Antenna Installation

If you use an RF connector for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
Figure 37: Dimensions of the U.FL-R-SMT Connector (Unit: mm)
SC200R&SC262R_Series_Hardware_Design 91 / 124