6. Remove the two caliper mounting bolts and remove
the caliper.
Caliper Disassembly
1. Remove brake pad adjustment set screw (K).
2. Push upper pad retainer pin inward and slip brake
pads past the edge and remove from the caliper.
3. Remove mount bracket (B) and dust boots (G and
H).
4. Using a hammer and a small punch, remove the
5. Clean the caliper body, piston, and retaining bracket
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
piston (C) from the caliper body (D). Remove the
square O-rings (E) and (F) from the caliper body (D).
with brake cleaner or alcohol.
NOTE: Be sure to clean seal grooves in caliper
body.
BRAKES
9
9.27