Polaris RZR 800 2013 Manual page 113

32. Remove snap ring from the assembly. Place housing
in a support and press out the bearing/shaft
assembly.
33. Place the shaft in a press to remove the bearing.
34. Press shaft into the new bearing.
35. Press the bearing/shaft assembly using the bearing's
36. Press gear onto shaft while supporting the housing.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
outer race. Do not use the shaft to press the
assembly into the housing, as bearing damage may
result. Install retaining ring.
ENGINE
3
3.51