Headlamp Replacement - Polaris RZR 800 2013 Manual

6. Adjust the beam to desired position. Repeat the
procedure to adjust the other headlight.
WARNING
Due to the nature of light utility vehicles and where they
are operated, headlight lenses become dirty. Frequent
washing is necessary to maintain lighting quality. Riding
with poor lighting can result in severe injury or death.

Headlamp Replacement

IMPORTANT: If an LED headlamp has fogging or
moisture inside, disconnect the wire harness from
the headlamp(s) for a few days to allow the moisture
to clear out.
1. Disconnect wire harness from headlamp assembly.
Be sure to pull on the connector, not on the wiring.
2. Remove the (3) T-25 headlamp mounting screws
3. Carefully lift and remove headlamp assembly from
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
and (3) adjustment preload springs.
NOTE: The front bumper can be removed and
placed face down on a suitable workbench to
ease headlamp replacement (see Chapter 5).
the bumper.
ELECTRICAL
10
10.21