Polaris RZR 800 2013 Manual page 418

BRAKES
5. Push caliper piston into caliper bore slowly using a
C-clamp or locking pliers with pads installed.
NOTE: Brake fluid will be forced through
compensating port into master cylinder fluid
reservoir when piston is pushed back into
caliper. Remove excess fluid from reservoir as
required.
9.12
6. Push the mounting bracket inward and slip outer
brake pad out between the bracket and caliper body.
7. Remove the inner pad from the bracket and caliper.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.