FINAL DRIVE
21. Position the boot lip in the groove. Install and secure
the boot with the large clamp using the "earless"
clamp pliers.
CV Boot Clamp Pliers
Earless Type: 8700226
7.12
Drive Shaft Installation
1. Install new spring ring on drive shaft. Apply an anti-
seize compound to splines.
2. Align splines of drive shaft with front gearcase and
reinstall the drive shaft. Use a rubber mallet to tap on
the outboard end of the drive shaft if necessary
3. Install drive shaft into the front bearing carrier.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.