Chapter 6 Connecting The T/Rh Cables; Cable Installations; Cable Positions - GSi GrainVue Installation Manual

6
Connecting the T/RH Cables
Topics Covered in this Chapter

▪ Cable Installations

▪ Cable Positions

▪ OPTION 1: Single Cable Connection
▪ OPTION 2: Installing and Connecting the Mux Whip
▪ OPTION 3: Installing and Connecting the Mux Box
Cable Installations
A T/RH Cable layout illustration is provided as
Ports, page 53.
1. If new T/RH Cables are being installed in the bin, refer to
cable installation locations. When installing the T/RH cables in their designated locations, refer to
the cable manufacturer's installation instructions.
2. If only pre-existing T/RH Cables are being connected to the Cable Monitoring system,
page 53 in Appendix-C: Cable Connection Ports, page 53
be referenced in the Cable Positions section below.
Cable Positions
After completing any one of the cable connections options, fill out
Cable Reference Details, page
Cable Connection Ports, page 53
PNEG-2347 Cable Monitoring System
Figure 8-3, page 53
54. When filling out this table, refer to
for the appropriate cable reference numbers.
in Appendix-C: Cable Connection
Figure 8-3, page 53 for the designated
will match the existing layout and should
Table 8-1, page 54 in
Figure 8-3, page 53
Figure 8-3,
Appendix-D:
in Appendix-C:
43