Chapter 3 Inspection Before Use
3.1 Inspecting Endoscopic Ultrasonic Probe
(1) Visually or manually check the external
appearance of this product and the probe
connector to make sure that they are free from
abnormalities such as cracks, starches, and
dents, as well as sharp edges and protrusions
that may injure the patient.
(2) Make sure that there are no air bubbles in the
ultrasound head.
[Note]
R e m o v e a i r b u b b l e s i f t h e y a r e i n t h e
ultrasound head or if the liquid ultrasound
transmission medium is not in the head.
"3.2 Removing Air Bubbles"
24
202B1263042