Check Software; Checking The Power Supply; Checking The Controller; Check Date And Time - Henny Penny FlexFusion FPG-221 Maintenance Instruction

Performing maintenance
• Exhaust gas values at partial load "Low" okay? (See chapter "Checking exhaust gas values at partial
load" in the installation instructions)
Measured CO :
2
Measured CO:
ppm

8.14 Check software

INFORMATION
Software version on the device :
Is the manufacturer's current software version installed on the device?
If no
Update software on the device
Software version after update:

8.15 Checking the power supply

DANGER
NOTICE
Check supply voltage
Type of connection
Test criteria
Action
• Close the unit (see "Opening and closing the unit").

8.16 Checking the controller

8.16.1 Check date and time

Prerequisite The unit is ready for use
36
Set CO
2
Vol % %
Set CO:
New software version may fix bugs and include feature enhancements.
Software
Risk of personal injury and property damage from electric shock
• Inspection and adjustment work that can be carried out only with the hous-
ing open and the unit under power must be performed only by electrically
trained qualified personnel.
Risk of property damage from using wrong wires
When servicing, only use wires with silicone insulation.
1NPE / AC 50/60 Hz, 2PE / AC 50/60 Hz, 120V
Actual value (V)
1. Switch on the voltage.
Maintenance instructions
: Vol
ppm
Yes No