Nikon SMZ800N Instruction Manual page 92

6
Attach a C-FIR Ring Fiber Illumination Unit.
Attach a ring fiber illumination unit to a P-Achro 0.5X, P-ED Plan 0.75X, P-Plan 1X, P-ED Plan 1.5X/WF, P-Plan Apo
0.5X/WF, P-Plan Apo 0.75X/WF or P-Plan Apo 1X/WF.
See the instruction manual for the C-FLED2 LED Light source for fiber illuminator for details on how to attach the
unit.
7
Attach a C-SSL DIA Sliding Stage.
Attach a DIA sliding stage to a P-PS32 Plain Stand,
P-DSL32 LED Diascopic Illumination Stand, P-DSF32
Fiber Diascopic Illumination Stand or C-DS Dia
Illumination Stand.
(1) Loosen the M4 set screw for the stage plate on the
base using a hex driver (nominal designation: 2) to
remove the stage plate.
(2) Attach the C-SSL DIA Sliding Stage to the base so
that it fits, and tighten the stage plate fixing screw.
(3) Attach the stage plate removed in Step (1) to the
C-SSL DIA Sliding Stage.
(4) Tighten the stage plate fixing screw for the C-SSL
DIA Sliding Stage.
8
Attach a Circular Floating Stage 2.
Attach a Circular Floating Stage 2 to a P-PS32 Plain
Stand, C-PSN Plain Stand or C-PSCN Compact Plain
Stand.
(1) Remove the stage plate from the base.
(2) Place a Circular Floating Stage 2 so that it fits the
base, and then securely attach it by tightening two
M2.5 hexagon socket head bolts and washers from
the base surface of the stand using a hex wrench
(nominal designation: 2) or a hex driver (nominal
designation: 2).
(3) Attach the stage plate removed in step (1) to the
Circular Floating Stage 2.
When using a P-PS32 Plain Stand, use a 90-dia.
stage plate separately.
Circular Floating Stage 2 attachment
The Circular Floating Stage 2 can be attached by fitting it into the base of the C-PSN/C-PSCN. Nikon
recommends securely attaching the stage by tightening bolts.
Chapter 5
Assembly
Securely attaching the C-SSL DIA Sliding Stage
Base
Securely attaching the Circular Floating Stage 2
78
Stage plate
fixing screw
Stage plate
fixing screw
Circular Floating
Stage 2
Stand Washers
Hexagon socket
head bolts