Chapter 5
Assembly
6
Attach an objective.
Attach the objective to be used to the zooming body. The
procedure for attaching an objective is the same for all
types.
Screw the objective into the objective attachment screw
hole at the lower plane of the zooming body.
Insert it straight from the bottom and securely screw it until
it touches the abutting joint.
Attaching the objective
Restriction
P-Achro 0.5X, P-ED Plan 0.75X and P-Plan 1X cannot be used with the SMZ1270/SMZ1270i.
The basic system assembly is complete.
70