Nikon SMZ800N Instruction Manual page 68

Chapter 4
Screw holes for attaching optional devices
The base's top board has screw holes for attaching various
devices. Screw holes (2) to (4) do not go right the way
through to prevent liquid penetrating into the base.
(1) 2-M4: Positioned under the stage plate attachment
part of the base. Usable for multiple
purposes. Used for attaching a C-TRS
Tilting Stage.
(2) 4-M6: Positioned under the stage plate attachment
part of the base. Used for attaching the
P-SXY64 XY Stage.
(3) 2-M4: Positioned at the center on the top surface
of the base. Usable for multiple purposes.
(4) 4-M5: Positioned at the rear on the top surface of
the base. Used for attaching a C-FDF
Flexible Double Arm Fiber Illumination Unit
(via a C-FIDH Fiber Holder).
Exchange for a C-EP support
The support pillar length is 145 mm longer than standard
when the original support pillar for this stand is exchanged
for a C-EP support. This is useful for attaching the focus
mount to a high position.
Functions and Operations of the Devices
175
4-M6
Depth 8
Screw holes for attaching optional devices
54
20 100 20
150
115
(2)
(4)
4-M5
Depth 7
(3)
2-M4
Depth 6
80
(1)
2-M4