Circular Floating Stage 2; C-Trs Tilting Stage - Nikon SMZ800N Instruction Manual

Circular Floating Stage 2

8.3
This stage is movable in the range of ±20 mm in the radial
direction.
The height of the stage is 17.7 mm.
Attach the stage to the position where the stage plate was
removed from the base. Attach the removed stage plate on the
Circular Floating Stage 2.
When this stage is used with a P-PS32 Plain Stand, a 90-dia. SM
Acrylic Plate (optional) is required separately. In this case, the
height of the stage is 16.7 mm. The stage is securely attached to
the P-PS32 using bolts. For details, see Chapter 5, "3.2 Assembly
of Other Devices (Optional) - [8] Attach a Circular Floating Stage
2."
[Usable stands]
 C-PSN/C-PSCN Plain Stand
 P-PS32 Plain Stand

C-TRS Tilting Stage

8.4
This stage can be tilted within ±30° of the tilt range to observe
samples. The rotation center of the tilt is positioned in the center
on the upper plane of the stage.
Attach the stage to the position where the stage plate was
removed from the base. Attach the removed stage plate or a
90-dia. SM Acrylic Plate (optional) on the C-TRS Tilting Stage.
The height of the stage is 48 mm. (when horizontal)
For details, refer to the instruction manual for the C-TRS Tilting
Stage.
[Usable stands]
 P-PS32 Plain Stand
 P-DSL32 LED Diascopic Illumination Stand
 P-DSF32 Fiber Diascopic Illumination Stand
 C-PSN/C-PSCN Plain Stand
 C-DS Dia Illumination Stand
 C-LEDS Hybrid LED Stand
Chapter 4
Functions and Operations of the Devices
Circular Floating Stage 2
C-TRS Tilting Stage
42