Nikon SMZ800N Instruction Manual page 107

 Tube
Name Binocular Tube
Model P-B
Angle of 20°
depression
Binocular/tube None
optical-path
switching
Eye point Height: Approx. 121 mm from the
mount joint (when the interpupillary
distance is 58 mm)
Field of view 22
number
Others
 Nosepiece
Name Nosepiece
Model P-RN2
 A double-hole nosepiece that can hold two
Function
objectives so that the objectives are switched
during observation
 The stereoscopic view and vertical view can be
generated by shifting the objective position.
 Attached to the objective mount of the zooming
body.
Objective M58x1.25
mount
Status detection
Others Not usable in combination with a C-FMAN/C-FMBN Focus Mount or C-LEDS Hybrid LED Stand
Chapter 8
Trinocular Tilting Tube
P-TERG100
P-TERG50
0 to 30°
(continuously changeable)
Lever push-in/pull-out
Variation: Approx. 90 mm (25 mm
to 115 mm from the mount joint,
approx. 106 mm when the
binocular part is turned 180°)
Binocular eyepiece tube: 22
Vertical tube: 18
─ Not usable in combination with a
C−PSN/C-PSCN Plain Stand, a
C-DS Dia Illumination Stand or a
C-LEDS Hybrid LED Stand
─
Specifications
Intelligent Nosepiece
P-RNI2
 A double-hole nosepiece that can hold two
objectives so that the objectives are switched during
observation
 The stereoscopic view and vertical view can be
generated by shifting the objective position.
 Attached to the objective mount of the zooming
body.
M58x1.25
Detect the objective mount address.
Detected information is sent to a PC via the SMZ1270i
using a USB.
93
Trinocular Tube
P-T100
10°
Lever push-in/pull-out
Approx. 48 mm
(Approx. 154 mm when the
binocular part is turned 180°)
Binocular eyepiece tube: 22
Vertical tube: 18
─