Nikon SMZ800N Instruction Manual page 81

2
Attach a focus mount.
 C-FMCN Focus Mount attachment
The C-FMCN Focus Mount can be attached to the
following stands:
 P-PS32 Plain Stand
 P-DSL32 LED Diascopic Illumination Stand
 P-DSF32 Fiber Diascopic Illumination Stand
[Focus mount orientation]
Attach the focus mount to the stand so that the focus
mount faces the front of the stand as shown in the figure.
CAUTION
Incorrect orientation of the focus mount
If the focus mount is attached in the incorrect orientation,
the stand may fall over. This may result in damage to the
device or unexpected injury. Do not attach the focus
mount if the focus mount does not face the front of the
stand as shown in the figure.
[Focus mount attachment position]
(1) Standard position
Insert the focus mount until it reaches the lower limit
of the support pillar, and tighten the focus mount
fixing knob on the rear side.
2) Position higher than the standard
Attach the supplied anti-drop collar so that it fits the
support pillar with the convex side up as shown in
the figure, and tighten the fixing knob on the rear
side at the required position. Then, insert the focus
mount until it reaches the anti-drop collar, and
tighten the fixing knob on the rear side of the focus
mount.
Chapter 5
Assembly
67
Correct orientation of the focus mount
Incorrect focus mount orientation
Securely attaching the focus mount
Securely attaching the anti-drop collar
Focus mount
fixing knob
Fixing knob
Anti-drop collar