Connecting Cables; Overview - Omron CJ Series Operation Manual

4-2

Connecting Cables

4-2-1 Overview

This section provides an outline of connecting a CompoNet Network using Round Cable I and Flat
Cable I cables.
Refer to SECTION 3 Wiring Configurations for information on the configuration. Refer to 4-4 Power
Supply Wiring for information on supplying communications power.
Round Cable I
Word Slave Unit
Note T-branching is also possible with a commercially available terminal block.
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
DCN4-TB4 Open Type
Connector
DCN4-TB4 Open Type
Connector
4 Installation and Wiring
DRS1-T Terminating
Resistor
4
4-5