Omron CJ Series Operation Manual page 126

4 Installation and Wiring
1
Preparing the Cable
At the tip of cable, make a cut line perpendicular to the cable length on the sheath, and strip the
sheath.
2
Setting the Cable Stopper
Set the cable stopper. Close the cover. Secure the hooks. Press down on the cable stopper until
it clicks into place.
3
Connecting the Cable
Confirm that the cable colors match the cable labels and then insert the unsheathed cable tip all
the way into the cable stopper in the cover.
4
Attaching the Housing
Confirm the colors again, and temporarily secure the housing to the cover.
Housing
Note Once it is attached, the housing cannot be removed from the cover. If you attempt to separate
the housing and the cover forcefully, you may damage the connector.
4-18
Green or Blue
Cable stopper
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
Red
White
Black
Location of
cable stopper