Omron CJ Series Operation Manual page 8

Manual Configuration
CX-Integrator Ver.2. @ Operation Manual (Cat. No. W464)
Section
Section 1
Overview
Section 2
Basic Operations
Section 3
Routing Tables
Section 4
Data Links for Controller Link and
SYSMAC LINK
Section 5
Ethernet
Section 6
DeviceNet
Section 7
CompoNet
Section 8
CompoWay/F
Section 9
NT Link
Section 10
Network Testing
Appendices
6
This section provides an overview of the CX-Integrator and describes the CX-Integra-
tor menus and connections.
This section describes the basic operations used for the CX-Integrator.
This section describes how to set the routing tables. For NJ-series, routing table is cre-
ated by using Sysmac Studio instead of CX-Integrator.
This section describes how to set data links for Controller Link and SYSMAC LINK net-
works.
This section describes the operations specific to Ethernet.
This section describes the settings and operations unique to DeviceNet networks
including registering slaves in the master, I/O allocations, and device monitoring.
This section describes the basic usage of CompoNet networks and how to set Compo-
Net parameters.
This section describes the settings and operations specific to the CompoWay/F sys-
tem.
This section describes the settings and operations specific to the NT Link system.
This section describes the operations of the network test tool.
The appendices describe the CPS files for Ethernet, Controller Link, CompoWay/F and
NT Link Networks, and EDS files for DeviceNet Networks.
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
Description