Omron CJ Series Operation Manual page 7

CompoNet Slave Units and Repeater Unit Operation Manual (Cat.
No. W457)
Section
Section 1
Features and Slave Units
Section 2
Wiring Configurations
Section 3
Installation and Wiring
Section 4
Basic Specifications of Slave Units
Section 5
Digital I/O Slave Units
Section 6
Analog I/O Slave Units
Section 7
Temperature Input Units
Section 8
Expansion Units
Section 9
Bit Slave Units
Section 10
Repeater Unit
Section 11
Smart Functions
Section 12
Troubleshooting and Maintenance
Appendices
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
This section describes the features of the CompoNet Slave Units and it lists the mod-
els that are available.
This section describes the features and wiring formations of a CompoNet Network,
and it describes the types of communications cables and wiring.
This section describes how to install the CompoNet Slave Units, connect the cables,
process and mount the connectors, and wire the CompoNet Network power supply.
This section provides the specifications that are common to all CompoNet Slave Units.
This section provides the specifications of the Digital I/O Slave Units.
This section provides the specifications of the Analog I/O Slave Units.
This section provides the specifications of the Temperature Input Units.
This section provides the specifications of the Expansion Units.
This section provides the specifications of the Bit Slave Units.
This section provides the specifications of the Repeater Unit.
This section describes the smart functions of CompoNet Slave Units.
This section describes how to troubleshoot errors in CompoNet Slave Units and it
describes device maintenance.
The appendices provide information on message communications, current consump-
tion, connection precautions, and other information.
Manual Configuration
Description
5