Omron CJ Series Operation Manual page 134

4 Installation and Wiring
2
Setting the Cable Stopper
This step is required only for extending the cable or connecting a Terminating Resistor.
For these purposes, the cable can end in the connector. Place the cable stopper in advance. Put
the cable in the cover. Position the cable so that the cable tip touches the stopper.
3
Attaching the Cable
(1) Hold the cable with the white line facing up and near the cover opening.
Cable
T-branch Connections
Extending the Cable or Connecting a Terminating Resistor
4-26
Cable stopper
Connector
White line
(Top view)
White line
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
Middle of connector