Advertisement
8.10
[0x28] Lock AFI
This command locks the AFI register in one or more transponders.
Depending on the ISO 15693 transponder type, different ISO 15693 host commands are
supported. These are described in section "Supported ISO 15693 host command for ISO
15693 transponders (Page 79)".
Note
Only ISO 15693 transponders
This command is only available for ISO 15693 transponders.
Table 8- 18
REQUEST-DATA
Byte
Content
Table 8- 19
RESPONSE-DATA
Byte
Content
Name
Description
MODE
Bit
Function
Function
ADR
UID
Write-protected serial number of the transponder. This UID is only required in addressed mode.
AFI
Application Family Identifier of the transponder
ISO15693
ISO 15693 error code of the transponder response. This byte is only available if STATUS = {0x95}.
ERROR
8.11
[0x29] Write DSFID
This command writes the DSFID to one or more transponders.
Depending on the ISO 15693 transponder type, different ISO 15693 host commands are
supported. These are described in section "Supported ISO 15693 host command for ISO
15693 transponders (Page 79)".
RF290R
Configuration Manual, 09/2014, C79000-G8976-C377-01
6
0x28
ISO15693 ERROR
7
6
0
0
Description
b000
not addressed
•
b001
addressed
•
b010
selected
•
Protocols for ISO 15693 host commands
7
MODE
7
5
4
3
0
0
0
8.10 [0x28] Lock AFI
(8 ... 15)
UID
-
2
1
0
ADR
71
Advertisement
