Protocols for the configuration of the reader
6.3 [0x83] Set Default Configuration (Reset)
Name
Description
LOC
CFG-REC 14 byte long configuration block read from address CFGn in CFG-ADR
For more information, refer to the section "Configuration parameters (CFG) (Page 21)".
2)
Note
Error code
A configuration for specifying the default settings with reserved configuration blocks causes
an error code.
46
specifies the memory location of the configuration block
b0 RAM
•
b1 EEPROM
•
Configuration Manual, 09/2014, C79000-G8976-C377-01
RF290R