Advertisement
Hexadecimal
value
0x94
0x95
A.5
Error codes of the transponders
Hexadecimal
value
0x01
0x02
0x03
0x0F
0x10
0x11
0x12
0x13
0x14
0xA0 ... 0xDF
All others
A.6
LED functions
When applying the power or resetting the reader, all four LEDs flash three times (LED test),
and the green "PWR" LED is then lit permanently:
LED
PWR
ACT
RF290R
Configuration Manual, 09/2014, C79000-G8976-C377-01
Buffer status
Other data:
More transponder data sets have been requested than the transponder pro-
•
tocol is capable of transferring simultaneously.
ISO 15693 error:
Additional error code for ISO 15693 transponder was sent with the response
•
data
Definition of the response error code
The command is not supported or is request code is not known.
The command is not recognized, Example: Format error occurred.
The option is not supported.
Unknown error
The specified block is not available (does not exist).
The specified block is already locked and cannot be locked again.
The specified block is locked and its content cannot be changed.
The specified block was not programmed successfully.
The specified block was not saved successfully.
Error codes of user-defined commands
Reserved for future use
Color
Meaning
green
Power
Power is on.
yellow
Active
Communication on the interface (to the reader/host).
A.5 Error codes of the transponders
Appendix
107
Advertisement
