Advertisement
Figure 3-3
Figure 3-4
Non-addressed mode
In the non-addressed mode, you do not need to know the UID of the transponder. This mode
is useful if there is only one transponder in the antenna field of the reader.
The following graphics show the necessary steps for communication with a transponder in
the non-addressed mode.
Figure 3-5
RF290R
Configuration Manual, 09/2014, C79000-G8976-C377-01
Sequence when reading in the addressed mode
Sequence when writing in the addressed mode
Sequence when reading in the non-addressed mode
Data transmission between RF290R and host
3.2 ISO 15693 host commands
13
Advertisement
