Name
Description
AFI
ISO
First application family identifier (AFI) for selecting a transponder
15693
AFI1
ISO15693
Bit
-TAGIT-
Function
OPTION
Function
WR-
OPTION
Note:
If WR-OPTION is set automatically, the reader sets WR-OPTION to 0 if the ISO 15693 host command is not in
the addressed mode.
ISO
Second application family identifier (AFI) for selecting a transponder
15693
Note:
AFI2
If AFI2 is not 0x00, the inventory will be repeated a second and third or fourth time with different AFI bytes.
ISO
Third application family identifier (AFI) for selecting a transponder
15693
Note:
AFI3
If AFI3 is not 0x00, the inventory will be repeated a second and third or fourth time with different AFI bytes.
ISO
Fourth application family identifier (AFI) for selecting a transponder
15693
Note:
AFI4
If AFI4 is not 0x00, the inventory will be repeated a second and third or fourth time with different AFI bytes.
ISO block
Bit
size
Function
Function
DB block
size
Block size •
Read
mode
RF290R
Configuration Manual, 09/2014, C79000-G8976-C377-01
b0 deactivated
•
b1 activated
•
7
6
0
0
Description
b00 set automatically
•
b10 Tag-Option = 0
•
b11 Tag-Option = 1
•
7
6
Read mode
Block size
Description
Defines the block size of an ISO transponder that is not listed in the MFR table or if the tran-
sponder is not used in the addressed mode.
Range: 0x01 ... 0x1F
If the value is 0x00, a block size of 4 bytes is set automatically.
b0 automatic (if the transponder is known)
b1 manual (specified as DB block size)
•
b00 automatic mode (if the transponder is known)
•
b01 read once
•
b10 read several times
•
5
4
3
0
0
WR-OPTION
5
4
3
Configuration parameters (CFG)
5.5 CFG4: Transponder parameters
2
1
0
2
1
DB block size
0
0
0
29