ProMinent DULCOMETER Assembly And Operating Instructions Manual page 63

Setting
Starting
value
[↳LIMIT] 0%
1
[BOOT
0 s
DELAY]
1 = in an upwards direction with mono-directional control: 0 .. +100% (setting with PUMP:
dosing↑), in a downwards direction: -100..0% (setting with PUMP: dosing↓).
2 = When switching over the metering direction, all actuators in the DULCOMETER
Compact Controller are reset to the factory settings for the selected metering direction.
Operating menus for the measured variables pH and ORP
Possible values
Increment Lower value
1% - 100%
1 s 0 s
Upper Remark
value
100% Checktime limit.
No basic load,
only PID control
value
9999 s Control delay
period after the
start of the meas‐
uring point. After it
is switched on, the
unit only meas‐
ures but does not
control during this
period.
®
63