Expansion-Card (Iplc) - Juniper PTX3000 IPLC Features Manual

PTX3000 Integrated Photonic Line System Feature Guide

expansion-card (IPLC)

Syntax
Hierarchy Level
Release Information
Description
Options
Example
90
expansion-card {
fpc fpc-slot;
}
[edit chassis fpc fpc-slot optical-options]
Statement introduced in Junos OS Releases 15.1F6 and 17.1R1 on PTX Series Packet
Transport Routers.
Create a logical association between the specified IPLC base module and IPLC expansion
module. The IPLC base module can accept and multiplex (add) and demultiplex (drop)
up to 32 individual wavelengths into a single fiber pair. If you require the IPLC to support
more than 32 channels, you can configure it to support an additional 32 channels by
installing and connecting the IPLC expansion module to the IPLC base module, thus
increasing the IPLC channel capacity to 64 channels.
Use this statement in combination with attaching the IPLC base and expansion modules
together through the front panel as follows:
Install the IPLC base module and IPLC expansion module in the chassis.
BEST PRACTICE:
same FPC/PIC slot pair in the chassis.
Connect the two IPLC modules together as follows:
Connect the XPN IN port of the IPLC base module to the
expansion module.
Connect the
XPN OUT
expansion module.
For complete details on making these connections on the PTX3000 Packet Transport
Router, see the
PTX3000 Hardware Guide
fpc-slot—Specify the slot in which the IPLC expansion module resides.
Range: 0 through 15
Default: None
If the IPLC base module resides in slot 1 and the IPLC expansion module resides in slot
2:
[edit]
user@host# set chassis fpc 1
We recommend that you place the IPLC modules in the
port of the IPLC base module to the
.
optical-options expansion-card fpc 2
XPN OUT of the IPLC
of the IPLC
XPN IN
Copyright © 2018, Juniper Networks, Inc.