Juniper PTX3000 IPLC Features Manual page 59

Chapter 6: Configuring the Optical Supervisory Channel in the Amplifier Chain When Using the Optical Inline Amplifier
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Verify that the software is now running.
6.
user@router# run show chassis fpc optical-properties amplifier-chain ila summary
fpc-slot 5 ila-number 2
ILA Number
ILA Name
ILA Position
OSC IP Address
10.0.0.13/255.255.255.0
Manufacture Name
Manufacture Date
Part Number
Serial Num
Calibration Date
Firmware Version
version shown here
Hardware Version
FPGA Version
X86CPLD Version
Board CPLD Version
System Date
System Time
Up Time
IP v4 Address/Mask/Gateway
192.168.7.136/255.255.0.0/ 192.168.7.254
OSC MAC Address
Board Temperature (C)
Temperature Threshold High/Low (C)
Power and Fan Plug Status (Fan 0/1/2, Power 0/1)
Fan2: 1 Power0: 0 Power1: 1
Fan Speed (Fan 0/1/2)
System Mode (auto/manual)
Firmware Upgrade Status (none/in progress/done)
Percent: 100
Understanding Optical Supervisory Channel Communication in the Amplifier Chain on
page 11
Configuring the Optical Supervisory Channel Across the Amplifier Chain of the PTX3000
Integrated Photonic Line System on page 33
2
ILA-2
3
oplk
2016-04-07
EDFA128ILAJUP01
3D2L6140005
2016-04-07
2.10.0002 #new
2.01
5.0
28
41
2015-09-22
18:43:03 GMT+0000
2363
aa:bb:cc:dd:ee:02
33.6
55.0/-5.0
Fan0: 1 Fan1: 1
9984 / 9984 / 9984
Auto
Status: Successful
43