Juniper PTX3000 IPLC Features Manual page 63

Table 5: IPLC Threshold Crossing Alert Minimum and Maximum Values (continued)
TCA
Erbium-Doped Fiber Amplifier (EDFA) Input Power (for Both EDFAs)
edfa1-in-power-high-tca
edfa1-in-power-low-tca
edfa1-out-power-high-tca
edfa1-out-power-low-tca
edfa1-pump-current-high-tca
edfa1-pump-current-low-tca
edfa1-sig-power-high-tca
edfa1-sig-power-low-tca
Erbium-Doped Fiber Amplifier (EDFA) Output Power (for Both EDFAs)
edfa2-awg-high-tca
edfa2-awg-low-tca
edfa2-express-high-tca
edfa2-express-low-tca
Copyright © 2018, Juniper Networks, Inc.
Description
Ingress EDFA input power high TCA
Ingress EDFA input power low TCA
Ingress EDFA output power high TCA
Ingress EDFA output power low TCA
Ingress EDFA pump current high TCA
Ingress EDFA pump current low TCA
Ingress EDFA signal power high TCA
Ingress EDFA signal power low TCA >
Egress EDFA pump AWG high TCA
Egress EDFA pump AWG low TCA
Egress EDFA pump express high TCA
Egress EDFA pump express low TCA
Chapter 7: Configuring Performance Monitor Thresholds
Range Minimum/Maximum
Default and Recommended
Granularity Value
0.5s 10/12 dBm
11 dBm
—38/—34 dBm
-35 dBm
20/21 dBm
20.5 dBm
—1/0.5 dBm
1s 10/300 mA
0.5s 10/12 dBm
11 dBm
—39/—35 dBm
—36 dBm
5s 390/440 mW
400 mW
5/15 mW
5 mW
390/440 mW
400 mW
5/15 mW
5 mW
47