Juniper PTX3000 IPLC Features Manual page 403
Packet transport router integrated photonic line system
Hide thumbs
Also See for PTX3000 IPLC:
- Quick start manual (48 pages) ,
- Hardware manual (174 pages) ,
- Quick start manual (37 pages)
Table of Contents
Advertisement
Copyright © 2018, Juniper Networks, Inc.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display environmental information for the
FPCs in the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display environmental
information for the FPCs in the specified member of the Virtual Chassis configuration.
Replace
with a value of 0 or 1.
member-id
satellite [fpc-slot slot-id | device-alias alias-name]—(Junos Fusion only)(Optional)
Display environmental information for the FPCs in the specified satellite device in a
Junos Fusion, or for all satellite devices in the Junos Fusion if no satellite devices are
specified.
slot or fpc-slot—(Optional) Display environmental information about an individual FPC:
(TX Matrix and TX Matrix Plus routers only) On a TX Matrix router, if you specify
the number of the T640 router by using only the
recommended method), replace
a TX Matrix Plus router, if you specify the number of the router by using only the
option (the recommended method), replace
lcc number
through
7
. Otherwise, replace
following commands have the same result:
user@host> show chassis environment fpc 1 lcc 1
user@host> show chassis environment fpc 9
M120 router—Replace
MX240 router—Replace
MX480 router—Replace
MX960 router—Replace
MX2010 router—Replace
MX2020 router—Replace
MX2008 router—Replace
Other routers—Replace
EX Series switches:
EX3200 switches and EX4200 standalone switches—Replace
EX4200 switches in a Virtual Chassis configuration—Replace
from 0 through 9 (switch's member ID).
with a value from
slot
slot
with a value from
slot
with a value from
0
through
with a value from
slot
0
slot
with a value from
0
with a value from
slot
0
with a value from
slot
0
with a value from
slot
0
with a value from
slot
0
with a value from
through
slot
0
Chapter 12: Operational Commands
lcc number
option (the
through
. Similarly, on
0
7
with a value from
slot
0
through
31
. For example, the
5.
through
.
2
through
5
.
through
.
11
through
.
9
through
.
19
through
.
9
.
7
slot
with 0.
with a value
slot
0
387
Advertisement
Table of Contents
Troubleshooting
