Ila-Options - Juniper PTX3000 IPLC Features Manual
Packet transport router integrated photonic line system
Hide thumbs
Also See for PTX3000 IPLC:
- Quick start manual (48 pages) ,
- Hardware manual (174 pages) ,
- Quick start manual (37 pages)
Table of Contents
Advertisement
PTX3000 Integrated Photonic Line System Feature Guide
ila-options
Syntax
Hierarchy Level
Release Information
Description
Options
96
ila-options {
edfa-a-b (tca-input-power-high | tca-input-power-low | tca-output-power-high |
tca-output-power-low | tca-pump0-current-high | tca-pump0-current-low |
tca-pump0-temperature-high | tca-pump0-temperature-low | tca-pump1-current-high
| tca-pump1-current-low | tca-pump1-temperature-high | tca-pump1-temperature-low
| tca-signal-output-power-high | tca-signal-output-power-low)
edfa-b-a (tca-input-power-high | tca-input-power-low | tca-output-power-high |
tca-output-power-low | tca-pump0-current-high | tca-pump0-current-low |
tca-pump0-temperature-high | tca-pump0-temperature-low | tca-pump1-current-high
| tca-pump1-current-low | tca-pump1-temperature-high | tca-pump1-temperature-low
| tca-signal-output-power-high | tca-signal-output-power-low)
ila-ipv4-address ila-ipv4-address
osc-a (osc-fiber-loss-high-tca | osc-fiber-loss-low-tca | osc-rx-power-high-tca |
osc-rx-power-low-tca | osc-tx-power-high-tca | osc-tx-power-low-tca)
osc-b (osc-fiber-loss-high-tca | osc-fiber-loss-low-tca | osc-rx-power-high-tca |
osc-rx-power-low-tca | osc-tx-power-high-tca | osc-tx-power-low-tca
voa-a (tca-attenuation-high | tca-attenuation-low)
voa-b (tca-attenuation-high | tca-attenuation-low)
}
[edit chassis fpc fpc-slot
optical-options amplifier-chain
Statement introduced in Junos OS Release 17.1R1 on PTX3000 integrated photonic line
system.
Configure the optical ILA IP address for optical supervisory channel communications
across the amplifier chain and threshold crossing alerts for the optical ILA performance
monitors.
NOTE:
To configure any other optical ILA options, you must log in to the
optical ILA CLI, see
You configure and manage optical ILAs through the associated anchor IPLC module in
the PTX3000 integrated photonic line system. All communication to the optical ILA is
through the anchor IPLC.
ila-ipv4-address ila-ipv4-address—Specify the IPv4 address of the optical ILA in the
format: w.x.y.z/a. To enable OSC communication to and from the specified optical
ILA, you must configure the IP address of the optical ILA.
TIP:
All communication to and from an optical ILA is through the anchor
IPLC in the PTX3000 integrated photonic line system, therefore when
you set the IP address of an optical ILA, you must also specify the FPC
ila ila-number]
Optical Inline Amplifier Hardware Guide
Copyright © 2018, Juniper Networks, Inc.
.
Advertisement
Table of Contents
Troubleshooting
