Juniper PTX3000 IPLC Features Manual page 478

PTX3000 Integrated Photonic Line System Feature Guide
Table 31: show chassis fpc optical-properties amplifier-chain ila summary Output Fields (continued)
Field Name
OSC IP Address
Manufacture Name
Manufacture Date
Part Number
Serial Num
Calibration Date
Firmware version
Hardware Version
FPGA Version
X86CPLD Version
Board CPLD Version
System Date and System Time
Up Time
IP v4 Address/Mask/Gateway
OSC MAC Address
Board Temperature (C)
Temperature Threshold High/Low (C)
Power and Fan Plug Status (Fan 0/1/2, Power 0/1)
Fan Speed (Fan 0/1/2)
System Mode (auto/manual)
462
Field Description
Displays the configured IP address of the optical ILA used for
optical supervisory channel (OSC) communications with the
anchor IPLC module in the PTX3000 integrated photonic line
system. The IP address must be on the same, private subnet
as the anchor IPLC.
Name of manufacturer.
Date of manufacture.
Part number of the optical ILA.
Serial number of the optical ILA.
Date of calibrating the components such as; pumps, optical
power, and so on.
Firmware version number.
Hardware version number.
Field-programmable gate array (FPGA) version number.
X86CPLD processor version number.
Board CPLD version number.
System time and date.
Time the device has been up.
IPv4 address for the optical ILA interface.
MAC address of the associated IPLC OSC management
interface.
Temperature of the main board.
Temperature at which an alarm is raised when it is too high or
it is too low.
Displays how many power supplies and fans are plugged in.
Fan speed.
System mode: auto or manual. The auto mode is the default.
The manual mode is available only for debug purposes.
Copyright © 2018, Juniper Networks, Inc.