Juniper PTX3000 IPLC Features Manual page 81

Chapter 8: Example: Configuring the PTX3000 Integrated Photonic Line System in a Metro Linear Packet Optical Network
Results
Copyright © 2018, Juniper Networks, Inc.
[edit chassis fpc 1 optical-options]
user@host# set wavelength 1556.96 switch et-12/0/2
Configure wavelength 1556.15 on port 6 of the IPLC base module to be switched to
5.
optical interface et-12/0/3.
[edit chassis fpc 1 optical-options]
user@host# set wavelength 1556.15 switch et-12/0/3
Confirm the configuration of the IPLC modules for Node A. If the command output does
not display the intended configuration, repeat the instructions in this procedure to correct
the configuration.
[edit chassis fpc 1 optical-options]
user@host# show
wavelength 1556.15 {
switch {
et-12/0/3;
}
}
wavelength 1556.96 {
switch {
et-12/0/2;
}
}
wavelength 1560.20 {
switch {
et-12/0/1;
}
}
wavelength 1561.01 {
switch {
et-12/0/0;
}
}
If you are done configuring the device, enter commit from configuration mode.
65