Toro TITAN Service Manual page 33

Toro Twin Cylinder Engine Installation (continued)
Titan Service Manual
3438-774 Rev A
g321707
5. Install the 3 remaining engine bolts.
6. Torque the 4 engine mounting bolts to 52 ± 5.8 N • m (450 ± 50 in-lb).
7. Apply anti-seize to the clutch end of the crankshaft.
8. Install the engine pulley onto the crankshaft.
9. Install the clutch on to the crankshaft ensuring that the slot in the clutch aligns
with the tab on the clutch anchor.
g212682
1. Engine Pulley
2. Screw
3. Clutch Stop
4. Flange Nut
10. Install the washer and clutch bolt.
Note: Apply Loctite to the clutch bolt.
Figure 9
Figure 10
5. Clutch Isolator
6. PTO Clutch
7. Washer
8. Clutch Bolt
Page 4–7 Engine: Service and Repairs