Toro TITAN Service Manual page 66

Adjust the Motion Control Handle (continued)
Chassis: Service and Repairs
g321538
6. Move the levers into the park position.
7. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
8. Verify proper function of the unit.
Note: Motion control levers may be adjusted up or down as well for operator
comfort by utilizing the additional mounting holes on the motion control
assembly. The motion control levers should always be mounted on the inside
of the motion control assembly.
Figure 54
Page 5–28 Titan Service Manual
3438-774 Rev A