Toro TITAN Service Manual page 48

Right Console Removal (continued)
Right Console Installation
Chassis: Service and Repairs
g322343
1. Lower the console into place, while moving the control panel assembly
through the opening in the console and into position. Ensure that the console
seats properly on the supports.
Note: Before securing the control panel to the console, ensure that all cables
and electrical connections are seated firmly in place on the underside of
the control panel assembly.
2. Secure the control panel assembly to the console.
3. Install the 3 (T30) shoulder screws securing the right console to the machine.
Torque screws 11 N • m (100 in-lb).
g321208
Figure 25
Figure 26
Page 5–10 Titan Service Manual
3438-774 Rev A