Toro TITAN Service Manual page 92

Mower Spindle Assembly (continued)
Mower Deck: Service and Repairs
g322065
1. Top Bearing
2. Spacer
3. Flip the spindle housing over and install the bearing spacer.
4. Press the lower bearing into the spindle housing by pressing equally on the
inner and outer race.
Note: The inner and outer race on the upper bearing must be supported
while installing the lower bearing.
5. Apply anti-seize to the spindle shaft and install the spindle shaft.
6. Flip the spindle over while supporting the shaft through the spindle housing.
7. Install the bearing shield.
8. Install the pulley.
Figure 80
3. Lower Bearing
Page 7–10 Titan Service Manual
3438-774 Rev A