Toro TITAN Service Manual page 77

Hydrostatic Drive Transmission Removal (continued)
Titan Service Manual
3438-774 Rev A
g321834
9. Disconnect the connectors securing the overflow tube to the chassis.
Note: Overflow tubes should stay connected to the top of the transmission.
To avoid oil leaking, keep the overflow tubes oriented up.
g321831
10. Remove the 4 bolts (2 bolts per side) securing the transmission to the hydro
cross plate.
11. Loosen the 4 outer frame mounting bolts (2 bolts per side).
12. Loosen the 2 bolts connecting the transmission to the rear cross member.
13. Remove the front mounting bolt.
14. Support the transmission and remove the mounting hardware. Lower the
transmission.
Figure 65
Figure 66
Page 6–11 Hydrostatic Drive System: Service and Repairs