Assembly/Disassembly Of Access Cover Unit - Canon JX500 Service Manual
Hide thumbs
Also See for JX500:
- User manual (336 pages) ,
- Manual (12 pages) ,
- Easy setup instructions (2 pages)
Table of Contents
Advertisement
6-4 Assembly/Disassembly of Access Cover Unit
6-4-1 Disassembly of Access Cover Unit
1. Remove the taping for the panel-main flat cable inside the main case unit. Open the access
cover unit fully. Lift up the access cover unit from the connection slit on the right side.
Remove the connection by sliding the access cover unit leftward.
2. Remove three access cover unit S1 screws on the reverse side. Remove the operation panel
unit. Pull up the two pawls on the operation panel unit as tracing an arc. Unplug three
cables connected to the operation panel unit.
Fig.Part 1-36 Disassembly of Access Cover Unit
Fig.Part 1-37 Disassembly of Operation Panel Unit
Part 1 - 87
(TP M3 × 8) × 3
Advertisement
Table of Contents
