Dialling Through A Switchboard (Pbx); Registering The Access Type And The Outside Line Access Number - Canon FAX-B840 User Manual

Dialling through a switchboard (PBX)

A PBX (private branch exchange) is an on-site telephone switchboard.
• If your fax is connected through a switchboard, dial an outside line access number first. Then dial the rest of the
number.
• If you want to dial with automatic dialling, you may have to insert a pause between the outside line number and the
telephone number when you register the number for one-touch or coded speed dialling.
• When the fax is connected to a PBX or other telephone switching system, you can register the access type and
outside access line number under the [R] button (see below). Once you have registered them, you simply need to
press [R] before dialling a fax or telephone number.
Registering the access type and the outside line access
number
See pp. 14, 15 for the buttons on the operation panel.
1 Press [Function], then press [Start/Copy] twice.
2 Use [ ] or [ ] to select R-KEY SETTING, then press [Start/Copy].
3 Use [ ] or [ ] to select PBX, then press [Start/Copy].
4 Use [ ] or [ ] to select the access line type for the switching system, then press [Start/
Copy].
You can select PREFIX or HOOKING. If you selected HOOKING, proceed to step 6.
5 If you chose PREFIX in step 4:
Enter the outside line access number (up to 19 digits) using the numeric buttons and then
press [Redial/Pause], then press [Start/Copy].
6 Press [Stop].
Registration ends and the fax returns to standby mode.
1
PSTN
HOOKING
13