Receiving Faxes Automatically: Fax Only Mode; Setting Fax Only Mode - Canon FAX-L280 Getting Started Manual

Receiving Faxes Automatically: FAX ONLY MODE (8-3)

14
Get user manuals: See SafeManuals.com
If you have a separate telephone line for fax use only, connect your FAX to
this line and set FAX ONLY MODE. Your FAX will answer all calls as fax
calls.

Setting FAX ONLY MODE

1
Press Receive Mode to select FAX
ONLY MODE.
After a few seconds, the LCD
changes to this display:
If FAX ONLY MODE does not appear in the LCD when you press Receive
Mode, follow this procedure to set this mode:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
4
Use or
. .
SETTINGS.
5
Press Set.
6
Use or
. .
7
Press Set.
8
Use or
. .
MODE.
9
Press Set.
10
Press Stop to return to standby
mode.
11
Confirm that FaxOnly is displayed
in the LCD.
If FaxOnly is not displayed,
press Receive Mode to select FAX
ONLY MODE. After a few
seconds, the LCD returns to
standby mode.
The numbers in parentheses indicate the pages in the FAX-L280/L200 User's Guide on which you can find
detailed information.
to select RX
to select RX MODE.
to select FAX ONLY
FAX ONLY MODE
Ex:
15:00 FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Ex:
15:00 FaxOnly
Ex:
15:00 FaxOnly