Receiving Documents Automatically: Fax Only Mode - Canon EB15 User Manual

Receiving documents automatically: FAX ONLY
MODE __________________________________________
If you have a separate telephone line for your fax, set FAX ONLY MODE for the fax to answer all
calls as fax calls.
Setting FAX ONLY MODE (FAX-EB10 only)
Your fax is factory-set to FAX ONLY MODE. If you have not changed the receive mode to Fax/Tel
mode, simply follow the procedure below.
1
Press [Receive Mode] to select FAX ONLY
MODE.
After a few seconds, the LCD changes to this display:
If FaxOnly does not appear on the LCD, follow the procedure below to set this mode.
Setting FAX ONLY MODE (All models)
1
Press [Function].
Press [Registration].
2
Press [Start/Copy].
3
Use [ 1] or [ 2] to select RX SETTINGS.
Press [Start/Copy].
4
Use [ 1] or [ 2] to select RX MODE.
Press [Start/Copy].
Different ways to receive a document
FAX ONLY MODE
Ex:
15:00
Function
DATA REGSTRATION
Registration
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FaxOnly
7
7-3