Changing Calling Volume; Receiving Documents In Memory While Performing Another Task Or When A Problem Occurs - Canon JX510P User Manual

Receiving to Memory Temporarily
You can enable/disable memory receiving feature temporarily by selecting <AUTO PRINT>
when [Menu] is pressed.
1
Press [Menu].
2
Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy].
3
Use [{] or [}] to select <PRINTER SETTINGS>, then press [Start/Copy].
4
Use [{] or [}] to select <AUTO PRINT>, then press [Start/Copy].
5
Use [{] or [}] to select <ON> or <OFF>, then press [Start/Copy].
6
Press [Stop/Reset].
Setting ends and the fax returns to standby mode.
If you select <ON> in step 5, received faxes will be printed automatically.
If you select <OFF> in step 5, the fax starts receiving documents in memory. The LCD
displays <AUTO PRINT OFF>.
Note
If the <AUTO PRINT> setting is set to <OFF>, the following will not be printed automatically:
ACTIVITY REPORT, TX REPORT, RX REPORT, MULTI TX REPORT and MEMORY CLEAR
REPORT.

Changing Calling Volume

1
Press [Menu].
2
Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy].
3
Use [{] or [}] to select <USER SETTINGS>, then press [Start/Copy].
4
Use [{] or [}] to select <VOLUME CONTROL>, then press [Start/Copy].
5
Use [{] or [}] to select <CALLING VOLUME>, then press [Start/Copy].
6
Use [{] or [}] to change the volume, then press [Start/Copy].
7
Press [Stop/Reset].
Setting ends and the fax returns to standby mode.
Receiving Documents in Memory While Performing Another Task or
When a Problem Occurs
If your fax is performing another task or encounters a problem when receiving a document, it
automatically stores the unprinted pages in memory, and the LCD displays <REC'D IN
MEMORY> as well as one or more messages. For an explanation of the message(s) and details
on the action to take, see page 88.
Note
Once the pages are printed, they are deleted from memory.
Receiving Faxes 37