BRP Can-am MAVERICK Trail T Series Operator's Manual page 67

Hill Descent Control (HDC) function
should be used to allow a smooth and
controlled hill descent when driving
down a steep incline without the driver
having to press the brake pedal. The
vehicle should maintain set speed
without any intervention from the
driver. HDC can be driver deactivated
or reactivated by the HDC switch. To
activate/deactivate, press and hold the
HDC switch for at least 0,5 sec (HDC
ON/OFF will be displayed in the lower
display zone and the traction control
icon will light up).
TRACTION CONTROL ICON
HDC activation / deactivation requests
will be valid at any vehicle speed:
– If HDC is activated below 4 km/h,
HDC target speed will be set to 4
km/h.
– If HDC is activated between 4 and
30 km/h, HDC target speed is con-
sidered the actual speed.
– If HDC is activated above 30 km/h,
HDC will be turned on in standby
mode (symbol still ON in the clus-
ter)
NOTE: When HDC is actively interven-
ing, the traction control icon will blink in
the cluster.
_______________
SECONDARY CONTROLS
65