Settings - BRP Can-am MAVERICK Trail T Series Operator's Manual

ICONS AND INDICATORS
When lit, seat belt
not buckled with
vehicle immobilized.
Flashing when vehicle
is moving.
When lit, indicates
that a maintenance
is required. See your
authorized Can-Am
dealer or person of
your own choosing for
the maintenance.
Track kit active (If
Traction Control icon
Turn on: When the
HDC is activated
or when there is
a malfunction of
the ABS module
Blink: when the TCS,
HDC, BTC or DTC is
doing an intervention.
Indicates that the
Traction Control
system is deactivated.
The system does
not reduce engine
power but reduces
driving stability.
It is therefore
necessary to drive
with appropriate
When lit, Denotes
Speed Limiter
mode is set.
Blink when
accelerator pedal
is pressed more
equipped)
caution.
than 95%
_______________

Settings

Setup
Using MENU button on the keypad, se-
lect SETTINGS and hold to enter set-
ting menu.
OK button can be pressed instead of
holding MENU button.
219002049-302
1. DRIVE MODE button
2. MENU button
3. OK button
4. TRIP button
Maintenance Reset
NOTE: Only when the maintenance
icon is displayed.
Using MENU button, select RES
MAINT and hold to reset maintenance.
TCS
Driver can deactivate TCS by going
into Settings and selecting TCS OFF by
pressing/holding MENU button in the
dash (TCS ON/OFF will be displaye d).
Fault Codes
NOTE: Only when fault codes are ac-
tives.
Using MENU button, select CODES
and hold to see active fault codes.
Fault codes will be scrol led on the
Lower Display.
Reset Stats
Using MENU button, select RESET
STAT and hold to rese t.
7.6" DIGITAL DISPLAY
69