Engine Identification Number; Compliance Label; Intended Use - BRP Can-am MAVERICK Trail T Series Operator's Manual

Engine Identification
Number
tmo2011-001-401_a
TYPICAL — ENGINE SERIAL NUMBER
LABEL
1. EIN (Engine Identification Number)

Compliance Label

Regulation (EU) 2016/1628
applicable for Non-Road Mobile
Machineries
Vehicles who comply to Regulation
(EU) 2016/1628 (NRMM) are identified
on the engine valve cover as well as on
the vehicle, near the VIN label.
NRMM_800_MY20
TYPICAL
219002040-012
TYPICAL
Rotax
EN-704908639-DEC
TYPICAL NRMM IDENTIFICATION LABEL
NOTE: Tampering with the engine
or its components voids the EU
type-approval of that particular engine.

Intended use

Agricultural tractor that can be used to
carry materials. Check the maximum
allowable load of the vehicle indicated
on the statutory plate and vehicle ma-
ximum load label, refer to
ON-PRODUCT LABELS
"T" tractor can tow a trailer on the road.
Check the maximum allowable load of
the trailer. Check the regulations for
your area regarding the use of a tractor
and trailer on the road. Connect the
trailer lights on the vehicle and install
a triangle for slow moving vehicles at
rear of the trailer.
_______________
VEHICLE IDENTIFICATION
NRSC G1 CO2 g/kWh:
#
Production date:
Family type:
e13
AT1/P V-####
IMPORTANT
. The Can-Am
XXXX
MXXXXXXX
MM-YYYY
XXXXXX
3