BRP Can-am MAVERICK Trail T Series Operator's Manual page 125

219001880-046_a
TYPICAL
Rotate bulb.
219001880-047_a
TYPICAL
Pull out bulb.
Properly reinstall removed parts in the
reverse order of their removal.
Validate headlights operation.
Headlight Beam Aiming
Turn adjustment screw to adjust beam
height to your convenience.
NOTE: Adjust headlights evenly.
219001880-116_a
1. Adjustment screw
Taillight Bulbs Replacement
The taillights are built with LEDs (light
emitting diode) and this technology
proved to be reliable. In the unlikely
event they do not work, have them
checked or replaced by an authorized
Can-Am dealer, a repair shop or person
of your choosing.
Front Turn Signal Light Bulb
Replacement
1. Remove the light bulb socket from
underside the fender.
219002007-021_a
TURN SIGNAL LIGHT SOCKET
1. Retaining screws
2. Replace the light bulb.
3. Reinstall the socket.
Rear Turn Signal Light Bulb
Replacement
1. Remove the turn signal lens re-
taining screw from underside the
fender.
219002007-020_a
1. Lens retaining screw
______________
MAINTENANCE PROCEDURES
123