BRP Can-am MAVERICK Trail T Series Operator's Manual page 151

REDUCED POWER STEERING ASSIST
1. When DPS is subjected to sustained severe steering conditions, the assis-
tance provided by the DPS motor may be reduced to protect the system.
– Once the load is reduced, the normal steering assistance will return.
2. CHECK ENGINE INDICATOR LAMP is ON and display shows CHECK DPS
– Seek service from an authorized Can-Am dealer, repair shop or person of your
own choosing for maintenance, repair or replacement.
PARTIAL OR NO RESPONSE FROM THE ACCELERATOR PEDAL INPUTS (CHECK
ENGINE IS ON AND PPS FAULT MESSAGE IS DISPLAYED)
1. Partial failure of the accelerator pedal sensors (PPS).
– Contact an authorized Can-Am dealer.
2. Total failure of the accelerator pedal sensors (PPS).
– Contact an authorized Can-Am dealer.
ABS INDICATOR LIGHT ON IN THE MULTIFUNCTION GAUGE AFTER A FEW
MINUTES OF RIDING
1. Burnt fuse.
– Check fuses condition.
2. ABS unit failure
– Contact an authorized Can-Am dealer.
CAUTION Even if the brakes fully operate in the event of an ABS failure,
the wheels can lock up during sudden braking. Beware of changes in brake
behavior in the event of ABS failure.
______________
TROUBLESHOOTING GUIDELINES
149